NIGHT MASTER 800-IR
NEXT GEN IR ILLUMINATOR
SUPERB RANGE AND CLARITY FOR YOUR NV
The Night Master 800-IR is a high-power, long-range infrared illuminator, which is capable of providing IR illumination to over 800m. Whether you use a dedicated night vision (NV) scope, a digital or tubed NV scope add-on or night vision binoculars, the NM800-IR will give you all the distance you need for spotting, accurately identifying and safely shooting your quarry.
Due to the adjustability of the power-output and beam (from spot to flood), the NM800-IR can be used with airgun, rimfire and centerfire rifles. You simply adjust it to suit your hunting needs and situation.
The first thing you will notice when using this IR illuminator is the clarity - there are no rings or artifacts in the beam, which you can get with some IR lasers. Next you will notice the powerful long-range illumination, which is useful for covertly spotting and shooting your quarry. This is thanks to the newly developed DR-IR LED module, which has a wavelength of 850nm - being more covert than of the IR lasers we have tested which were 800-810nm. The 800IR has a wide voltage range, allowing the use of one or two 18650 rechargeable batteries. The two-battery configuration requires an additional extension tube and will give you a boost in output and a longer runtime.
Just like the NM800 model, the IR version is able to accept different coloured LED modules, making it both adaptable and upgradeable.
- Up to 800m beam
- Superb beam clarity
- Focusable beam - from spot to flood
- Multiple modes for various situations
- Use colour LEDs for long range coloured light
- Small and lightweight
- Easy to scope mount
- 18 Month Warranty and Limited Lifetime Warranty
- Night Master 800-IR
- High Scope Mount
- Rechargeable Battery
- Dual-Bay Charger
- LED removal tool
- Spare Rubber Switch Boot
- Spare O-rings
- User Manual
- 18 Months Warranty
As above kit plus
- Extra battery
- Extension tube
FREE UK DELIVERY
- Uses a newly developed DR-IR LED
- Length: 15cm
- Weight: 295g (with battery)
- Powered by either one or two18650 rechargeable batteries
- Use as a 1-mode (High) or a 3-mode torch (Low-Med-High)
- Made from Aircraft Grade aluminium
- Waterproof to IPX-8 standard
- Type III Hard Anodised finish
SEE IT IN ACTION!
WARNING: Some videos below contain footage of animals being shot.
If you find this offensive, please do not watch.
SELECT A VIDEO: Click on a thumbnail image above to view the video.
With conventional lamps a coloured filter is often used to change the colour of the beam in order to spot quarry without spooking it. However, as soon as you place a filter over a lamp lens you are filtering the light intensity and reducing its range, sometimes to a frustratingly short distance.
We decided to do it differently, which is why we provide coloured LED modules that can be used inside the NM800. By using coloured LEDs there is no light filtration, so you get 100% power and range from the light. You can see further, identify quarry accurately and shoot safely.
Many of our customers have tested their new Night Masters against their existing big lamps and have been shocked at how much more powerful their NM800 is over the traditional lamps.
We have three coloured LED modules to choose from - red, green and yellow. To get maximum power from these, use the extension tube with two 18650 batteries.
View the videos above to see the light in action.
Pic: NM800 with red LED module at 100m
WHAT YOU GET
NIGHT MASTER 800-IR KIT (£189.95)
NM800-IR Illuminator with adjustable long-range beam, multiple modes and glow-in-the-dark switch.
Quick release mount that fits multiple scope sizes, including 1" and 30mm. Its height provides sufficient clearance of the objective lens.
Rechargeable high power lithium battery. This is a high quality battery that beats most batteries of its type for efficiency and run-time.
Two-bay battery charger for charging Night Master 18650 batteries.
Fully Adjustable Scope Mount Set
This mounting set comes with two main pieces; a scope with with rail section on top and a fully adjustable rail mount with windage and elevation adjustment. Both pieces will fit 30mm and 1-inch tubes (with supplied spacers). These are for the shooter who wants full control of their illumination and to adjust the beam positioning for various distances.
LED in Neck Section for Night Master/ XSearcher
This is the easy way to change LEDs in both the Night Master and XSearcher torches. Just select which LED you want and we will pre-install it into a neck section for you. Then, when you want to use it, just unscrew the head and body tube away from your Night Master or XSearcher and attach them onto the new neck section. It's quick and easy, and is the best way to change your LEDs in a field.
Click the 'Buy Now' button and select the colour LED you want; either white (use with 1 battery), white turbo (use with two batteries), red, green or yellow.
Dereelight Night Master/XSearcher Neck Section
Spare neck section for the Dereelight Night Master and XSearcher torches. Install your LED once, then all you have to do is swap the neck section of the lamp when you want to change colour. The neck section also comes with a spring and brass contact ring.
White XR-E LED Module (Night Master or XSearcher)
This white LED is specifically for the Night Master 400, 800, '800-IR (infrared) and the XSearcher lights. It has two light settings; 1-mode (High mode) and 3-modes (Low-Mid-High). It is also available pre-installed into a neck section to make LED changes quicker and easier.
White HD XP-G2 De-Domed LED with 3-modes (Night Master or XSearcher)
This new white 'HD' (high definition) LED has a yellow tint and provides better beam distance and clarity than the XR-E LED. It fits the Night Master 400, 800 and XSearcher lights and improves the range of each - allowing you to identify objects much further away. You can use either 1 or 2 18650 batteries with the XP-G2 LED - using 2 batteries will give better performance.
Infrared LED (850nm) for Night Master/ XSearcher
We have developed this IR LED specifically for the Night Master and XSearcher. Being infrared the beam is invisible to humans and animals, but can be seen through a night vision device. Please note that this IR LED has a wavelength of 850nm (works great with most digital and tubed night vision devices).
XSearcher Head for Night Master
The XSearcher head is an add-on for the Night Master 800 and '800-IR models. To use, you simply unscrew the Night Master head and replace it with this one - using your existing LED. It uses a 66mm convex lens, compared to a 50mm lens in the Night Master. This bigger lens provides a tighter beam and more distance. Despite being bigger, there is still sufficient clearance from a scope's 56mm objective lens tube when using the high scope mount supplied in the Night Master 800 kit.
Scope ring with top rail
This scope ring will fit both 30mm and 1-inch scope (using the supplied spacer) and provides a section of rail on top of the scope for fitting a quick detach (QD) mount. You can save £5 if you buy the Fully Adjustable Scope Mount Set, which includes this cope ring and the Fully Adjustable Scope Mount.
Fully Adjustable Rail Mount
(Ideal for Pulsar N550/ N750)
This quick detach (QD) rail mount offers both windage and elevation adjustment and a lock function to secure your particular settings. It will fit both a 30mm and 1-inch tube (with supplied spacer). This QD mount very popular for use with the Night Master 800-IR infrared illuminator and the Pulsar N550/ N750 night vision device as it allows the user to adjust the beam for their shooting distance. It is suitable for rifles/ guns and night vision devices with rails.